LiFePO4 battery 6.4V 1.5Ah 9.6Wh
6.4V 1.5Ah 9.6Wh LED emergency lighting battery LiFePO4 battery pack HT lithium rechargeable battery18650 1500mAh 3.2V cell emergency solutions replace Ni-Cd Ni-MH battery
Product discription: |
LiFePO4 battery 6.4V 1.5Ah 9.6Wh |
Application solution: |
LED light /portable lamp/emergencylighting |
Cell model: |
3.2V 4.8Wh 1500mAh 18650 |
Electrical Configuration: |
2S1P |
Mechanical configuration |
F3*1 |
Nominal voltage: |
3.2V |
Nominal capacity: |
1500mAh |
Internal resistance: |
RSS≤55mΩ (singel cell) |
Charge Voltage: |
3.65V |
Charge Current: |
0.8A |
Constant Discharge Current: |
0.8A |
Peak Discharge Current: |
2A |
Discharge Cut-off Voltage: |
2V |
Dimension: |
L38*W20*T68mm |
Weight: |
about(110±0.05)G |
Certifications: |
UL,BIS, IEC, UN38.3,RoHS,REACH |
Cycle Life: |
>1000 cycles by IEC standard |
Operation temp. |
Standard Charge: |
0ºC~60ºC |
Standard Discharge: |
-20ºC~70ºC |
Quick Charge: |
10ºC~60ºC |
Quick Discharge: |
-10ºC~70ºC |
Cell body temperature is not over 80ºC |
wire & connector: |
UL1007 22#,150±5mm; JST-SMP-02V-NC |
Case: |
/ |
Storage performance |
Items |
1 month |
3 months |
6 months |
Capacity retention rate |
≥95% |
≥90% |
≥85% |
Capacity recovery rate |
≥97% |
≥93% |
≥90% |
Stored cell with 50% SOC at an ambient temperature 25ºC. |
Capacity recovery |
≥98.5% |
≥95% |
≥93% |
Proposed to charge/discharge cell one time per 6 months, if it needs to store for long time. |
Product discription: |
LiFePO4 battery 3.2V 2Ah 6.4Wh |
Application solution: |
LED light /portable lamp |
Cell model: |
3.2V3.2Wh 1000mAh 18500 |
Electrical Configuration: |
1S2P |
Mechanical configuration |
F2*1 |
Nominal voltage: |
3.2V |
Nominal capacity: |
2000mAh |
Internal resistance: |
RSS≤60mΩ (singel cell) |
Charge Voltage: |
3.65V |
Charge Current: |
0.8A |
Constant Discharge Current: |
0.8A |
Peak Discharge Current: |
2A |
Discharge Cut-off Voltage: |
2V |
Dimension: |
L40*W20*T55mm |
Weight: |
about(80±0.05)G |
Certifications: |
UL,BIS, IEC, UN38.3,RoHS,REACH |
Cycle Life: |
>1000 cycles by IEC standard |
Operation temp. |
Standard Charge: |
0ºC~60ºC |
Standard Discharge: |
-20ºC~70ºC |
Quick Charge: |
10ºC~60ºC |
Quick Discharge: |
-10ºC~70ºC |
Cell body temperature is not over 80ºC |
wire & connector: |
UL1007 24#,170±5mm; SMR-2P male and female connector |
Case: |
/ |
Storage performance |
Items |
1 month |
3 months |
6 months |
Capacity retention rate |
≥95% |
≥90% |
≥85% |
Capacity recovery rate |
≥97% |
≥93% |
≥90% |
Stored cell with 50% SOC at an ambient temperature 25ºC. |
Capacity recovery |
≥98.5% |
≥95% |
≥93% |
Proposed to charge/discharge cell one time per 6 months, if it needs to store for long time. |